HARDENER HP 150
HARDENING AGENT FOR SOLVENT-FREE EPOXY SYSTEMS
Epoxy resin hardener based on modified cycloaliphatic amine adducts. Use with RI 301 in proportion:100 + 45. Pot-life at +20°C = 30’- 35’ (tested on 150 g).
| Viscosity at 25 °C | 30 - 90 cP | |||||||||||||
| Density at 25 °C | 1,03 g/cm3 | |||||||||||||
| H+ | 90 g/eq | |||||||||||||
| Amino no. | 325 - 350 mgKH/g | |||||||||||||
| Gardner | < 2 | |||||||||||||
| Use ratio | 100 + 45 |
Pour the hardening agent in the resin and blend at slow speed for 3’ – 5’ using drill with helix/spiral to reduce air inlet as much as possible; during this operation, scrape also the bottom and the sides of the bucket.
Three essential rules are valid for all bi-component systems: weigh well, carefully mix bottom and walls,
observe times of use.
Available in cans as per amount shown in the table below: 2.25 kg – 4.50 kg – 9.00 kg – 25.00 kg
Hardening agents remain unaltered for at least 18 months if stored in a dry and sheltered place at a
temperature between +10°C and +30°C in their origin al sealed containers.